Welcome to Beetel Modems

Home > ADSL Modem > Beetel 1000S ADSL Modem
Beetel 1000S ADSL Modem Product Specifications




Downloads
User Guide Download
Firmware v1.0 Download
Firmware v3.0 Download
Detailed User Manual Download


ELECTRICAL & ENVIRONMENTAL SPECIFICATIONS

Description Specifications
Safety ITU-T K.21 Lighting surge without primary protection 4.0KV
   
ESD ±6.0KV
   
EMI VCCI Class B
   
Insulation register 10M ohm
   
Insulation voltage AC 1kv/10ma 1 minute
   
Noise AC Line:1kv
  GND : 600V
  Tel Line : 500V
   
Vibration Amplitude :1.5mm,10~50Hz X/Y/Z
   
Drop test Height : 75cm
   
AC power Voltage :AC 100V±15%(50/60Hz)
  Dissipation power : 6W
  Instance drop : 5 cycle per 120cycle
   
Operating 0 to 40°C :short term
temperature range 5 to 40°C :Long term
   
Operating humidity 10 to 90% (non condensing)
   
Weight 300g
   
Dimensions 164(W) X 132(H) X31(D) mm
HARDWARE

Description Specification
ADSL Interface ITU-T 992.1 G.dmt Annex C
  ITU-T 992.1 Annex A PSD mask
  ITU-T G.994.1 G.hs
  Both FBM and DBM
  RJ-11 Connector (x1)
   
LAN Interface 10/100Base-T Ethernet
  RJ-45 Connector (x1)
   
Processor type Helium 210-80 (GlobeSpanVirata)
   
Memory SDRAM : 16MB
  Flash ROM : 2MB
   
LED Indicators Power indicator(Green)
  ADSL Link: connection(Green)
  LAN Link: connection(Green)
  LAN Data: activity(Green)
   
RESET Switch Reboot for factory mode
   
Certification JATE/VCCI


SOFTWARE

Description Specifications
Protocol RFC 1483 IPoA Bridged LLC encapsulation /VC encapsulation
  RFC 1483 IPoA Routed LLC encapsulation /VC encapsulation
  RFC 2364 PPPoA LLC encapsulation /VC encapsulation
  RFC 2516 PPPoE encapsulation
   
Addressing method Fixed IP
  DHCP client
   
Security PAP
  CHAP
   
OAM Function F4 Segment Loopback / End – End Loopback
  F5 Segment Loopback / End – End Loopback
  AIS / RDI Supported
  EOC(ADSL modem without primary protection via EOC)
   
ATM ATM Forum
  AAL5 Support
  ATM QoS : UBR+, CBR
  ATM to ADSL TC : ASO Downloadstream, LSO Upstream
   
Transmission Protocol TCP / UDP
IPv4
  ARP
  DHCP Server / MAC address – IP address setting
  IEEE 802.1d transparent learning bridgin
   
Routing Protocol RIP / Static Routing
   
Management Protocol SNMP / ICMP
   
Firewall NAPT(IP Masquerade)
  IP Packet Filtering / TCP, UDP Packet Filtering
  DMZ Port
  Local Server (Special port IP)
   
Control Router configuration to telnet
  Configuration setting for HTML Browser Interface (Web based UI)
  Software upgrade from Web server